The principle of the flat blade pump transport of ?TNT-group?Fluid Technology is to use a flat plate with radioactive block-shaped stripes to make the impeller. The special structure of the flat impeller is driven by physical self-adhesion to drive the special structure of the medium to form a laminar flow to pull the fluid medium from the inlet into the outlet. The centrifugal flat blade pump relies on physical self-adhesive driving and the medium forming laminar flow to transport the fluid medium. Therefore, the medium has no impact strip-like cyclone in the pump, and the contact impeller and the pipe wall flow layer move in synchronization with the impeller stationary and motion without friction. It is transported with low impact damage to the mixed multi-phase flow medium, and there is a layer that can protect the pump Therefore, the medium wears very little to the flat-blade pump impeller and pump body and blocks the impeller, causing cavitation and other common pump disadvantages. The special function of the flat blade pump makes the pump more reliable, superior, economical and efficient in harsh conditions. At the same time, the most important thing is products that do not destroy the media. Suitable for transporting media with different viscosity and media with high viscosity. A medium containing particles and a medium that needs to protect the particles from damage. It is necessary to convey softly the medium that is not suitable for high-speed impact from centrifugation. Scope of use: Suitable for transporting media with different viscosity and high viscosity media, containing up to 75% solid particles (30-80MM particles can be designed to transport according to requirements) and media that need to protect the particles from damage, containing gas or air content can reach up to 68 % medium, cotton pulp containing various fibers, wood pulp, medium and sewage and garbage that need to be gently conveyed, which are not subject to high-speed impact from centrifugal.? |
